Parts for this fork

Marzocchi compatible Bomber BUMPERS in different sizes. Price is for a PAIR of Bumpers = 2 pcs.  For all Marzocchi Forks with DUAL- or TRIPLE-Crowns having 30, 32, 35, 38 or 40mm Stanchions.

Marzocchi compatible Bomber BUMPERS in different sizes. Price is for a PAIR of Bumpers = 2 pcs.  For all Marzocchi Forks with DUAL- or TRIPLE-Crowns having 30, 32, 35, 38 or 40mm Stanchions.

Marzocchi compatible Bomber BUMPERS in different sizes. Price is for a PAIR of Bumpers = 2 pcs.  For all Marzocchi Forks with DUAL- or TRIPLE-Crowns having 30, 32, 35, 38 or 40mm Stanchions.

Marzocchi compatible Bomber BUMPERS in different sizes. Price is for a PAIR of Bumpers = 2 pcs.  For all Marzocchi Forks with DUAL- or TRIPLE-Crowns having 30, 32, 35, 38 or 40mm Stanchions.

This is about a HQ CNC Direct Mount Stem >> long << for Marzocchi SHIVER, MONSTER, Jr. T, Super T, etc. .

Replacement disc brake hose clamp for Marzocchi forks from 2008: 888, 66, 55, 44, Dirt Jumper and 4X. Replaces the Marzocchi cable clamp 5321717.

This is about a set of handlebar reducers (2 pcs) for Marzocchi stems used in SHIVER, 888, MONSTER, Jr. T, Super T , etc. Reduces from 38,8 -> 22,2 mm.

Marzocchi Lower Bottom Adjuster Knob black 5321073 (2004+?) (1 pcs).

Marzocchi Lower Knob red RV – 549089 (2006+) (1 pcs). This is a 3D printed version using MJF – HP Multi Jet Fusion technique.

Marzocchi Lower Rebound Knob red CR 55 / 66 / 888 549226 (2012+) (1 pcs). This is the red Cap with a 3mm Inbus which covers this Foot Nut . **Attention : 2 are in stock, but both have a broken red plastic cap.**

Marzocchi 33 / 44 / 55 / CORSA / 888 / … Lower TST 2 REBOUND Knob black 8501363 (1 pcs).

Marzocchi Lower TST2 Rebound Knob red – 8501527 (2011+) (1 pcs). This is a 3D printed version using MJF – HP Multi Jet Fusion technique.

This tool is used for pressing the 38mm oil seal into the lowers top. The smaler bottom section is long enough to keep the tool vertical as this is most impoartant to press the oil seal in! Will be blue and made in FDM printing in future.

This is about a HQ CNC Custom made Marzocchi SHIVER DC Full Flat Top Crown 1 1/8" bolted (2003-2005). Geometry is based on original Marzocchi SHIVER DC crowns projected to 2D + completly reinforced on all geometry to match expected forces.

This is about a HQ CNC Custom made Marzocchi SHIVER DC Full Flat Top Crown 1 1/8" bolted (2003-2005). Geometry is based on original Marzocchi SHIVER DC crowns projected to 2D + completly reinforced on all geometry to match expected forces.

Using this tool you can perfect protect your 35mm fork lowers/UPD tubes when you try to lever out the oil seal out of the lowers! As you know the Bombers Oil Seal are very good and resists strongly by trying to pull it out. Most common you will damage your sliders edges and paint without using such a tool! Also use round clamps to fix the lowers! Take care!

66 RC3

This REBUILD package v2.3 ‘COMPLETE’ is about all you need to rebuild your Marzocchi SHIVER 35mm Fork DIY!! 🎈🎁🛠💊 It includes 2 Set’s of Seals , Tools, including a Set of NEW Bushings! , Knobs, Screws, Marzocchi Ahead Cap, O-Rings & Bits for Cartridge and more! You’ll receive a massive number of parts more than included in the original Marzocchi Repair Set (not available anymore)! Optional you can buy a Set of NEW SHIVER Guards for a Special discounted Price! Also new Top Caps with inflating Screw are available (optional) – you can choose out of 3 colours!! Buy this Package and save >>40%!!

Complete main Seal Kit for Marzocchi Bomber forks with 35mm stanchions - same as **Marzocchi Art. no. 850716/P.** Fits the iconic large-diameter Bomber models from the 2000s like the SHIVER DC and many others.